The Benefits To Integrate ISO 14001:2004 and ISO 9001:2008
Reduce the time and cost of implementing the new specification by acquiring a concise, yet thorough understanding the scope of ISO 14001:2004 and key terms.
Avoid spinning your wheels by learning precisely which modifications and additions to ISO 14001:2004 require your attention for compliance with ISO 9001:2008.
Get a quick handle, through hands-on activities, on the environmental aspects of ISO 14001:2004, including how to:- Develop an environmental policy statement appropriate for your company- Integrate processes for identifying environmental aspects and impacts- Identify environmental objectives, set related targets, and establish programs for achieving results- Integrate environmental responsibilities and authorities into a management system- Outline an environmental awareness and training program- Establish environmental metrics and indicators for monitoring performance- Integrate requirements on non-conformance and corrective and preventive actions into your existing system- Understand the purpose and scope of the environmental management review- Integrate document control requirements of ISO 14001:2004 into your current system- Identify those operations that need to be controlled under EMS and identify emergency operations and contingencies that must be considered as part of EMS
Get off to a running start by learning to use a versatile prioritization matrix to identify and prioritize significant environmental aspects and impacts.
Optimize understanding and retention with the Plexus Learning Model- Multiple learning channels through lecture, coaching, group activities, innovative learning exercises and case studies.- Hands-on insights. Lecturing is minimized so learning is maximized.- Learn by doing. Connect the lessons learned to your real world by using your current circumstances as examples for activities.
Tuesday, September 29, 2009
Demonstrating conformity with ISO 9001:2008
Demonstrating conformity with ISO 9001:2008
For organizations wishing to demonstrate conformity with the requirements of ISO 9001:2008, for the purposes of certification/registration, contractual, or other reasons, it is important to remember the need to provide evidence of the effective implementation of the QMS.
Organizations may be able to demonstrate conformity without the need for extensive documentation.
To claim conformity with ISO 9001:2008, the organization has to be able to provide objective evidence of the effectiveness of its processes and its quality management system. Clause 3.8.1 of ISO 9000:2005 defines “objective
evidence” as “data supporting the existence or variety of something” and notes that “objective evidence may be obtained through observation, measurement, test, or other means.”
Objective evidence does not necessarily depend on the existence of documented procedures, records or other documents, except where specifically mentioned in ISO 9001:2008. In some cases, (for example, in clause 7.1(d)
Planning of product realization, and clause 8.2.4 Monitoring and measurement of product), it is up to the organization to determine what records are necessary in order to provide this objective evidence.
Where the organization has no specific internal procedure for a particular activity, and this is not required by the standard, (for example, clause 5.6 Management Review), it is acceptable for this activity to be conducted using as a basis the relevant clause of ISO 9001:2008. In these situations, both internal and external audits may use the text of ISO 9001:2008 for conformity assessment purposes.
For organizations wishing to demonstrate conformity with the requirements of ISO 9001:2008, for the purposes of certification/registration, contractual, or other reasons, it is important to remember the need to provide evidence of the effective implementation of the QMS.
Organizations may be able to demonstrate conformity without the need for extensive documentation.
To claim conformity with ISO 9001:2008, the organization has to be able to provide objective evidence of the effectiveness of its processes and its quality management system. Clause 3.8.1 of ISO 9000:2005 defines “objective
evidence” as “data supporting the existence or variety of something” and notes that “objective evidence may be obtained through observation, measurement, test, or other means.”
Objective evidence does not necessarily depend on the existence of documented procedures, records or other documents, except where specifically mentioned in ISO 9001:2008. In some cases, (for example, in clause 7.1(d)
Planning of product realization, and clause 8.2.4 Monitoring and measurement of product), it is up to the organization to determine what records are necessary in order to provide this objective evidence.
Where the organization has no specific internal procedure for a particular activity, and this is not required by the standard, (for example, clause 5.6 Management Review), it is acceptable for this activity to be conducted using as a basis the relevant clause of ISO 9001:2008. In these situations, both internal and external audits may use the text of ISO 9001:2008 for conformity assessment purposes.
Guidance on Clause 4.2 of ISO 9001:2008
Guidance on Clause 4.2 of ISO 9001:2008
The following comments are intended to assist users of ISO 9001:2008 in understanding the intent of the general documentation requirements of the International Standard.
a) Documented statements of a quality policy and objectives:
Requirements for the quality policy are defined in clause 5.3 of ISO 9001:2008. The documented quality policy has to be controlled according to the requirements of clause 4.2.3.
Note: Organizations that are revising their quality policy for the first time, or in order to meet the amended requirements in ISO 9001:2008, should pay particular attention to clause 4.2.3 (c), (d) and (g).
Requirements for quality objectives are defined in clause 5.4.1 of ISO 9001:2008. These documented quality objectives are also subject to the document control requirements of clause 4.2.3.
b) Quality Manual:
Clause 4.2.2 of ISO 9001:2008 specifies the minimum content for a quality manual. The format and structure of the manual is a decision for each organization, and will depend on the organization’s size, culture and complexity. Some organizations may choose to use the quality manual for other purposes besides that of simply documenting the QMS
A small organization may find it appropriate to include the description of its entire QMS within a single manual, including all the documented procedures required by the standard.
Large, multi-national organizations may need several manuals at the global, national or regional level, and a more complex hierarchy of documentation.
The quality manual is a document that has to be controlled in accordance with the requirements of clause 4.2.3.
c) Documented procedures:
ISO 9001:2008 specifically requires the organization to have “documented procedures” for the following six activities:
4.2.3 Control of documents
4.2.4 Control of records
8.2.2 Internal audit
8.3 Control of nonconforming product
8.5.2 Corrective action
8.5.3 Preventive action
These documented procedures have to be controlled in accordance with the requirements of clause 4.2.3 Some organizations may find it convenient to combine the procedure for several activities into a single documented procedure (for example, corrective action and preventive action). Others may choose to document a given activity by using more than one documented procedure (for example, internal audits). Both are acceptable.
Some organizations (particularly larger organizations, or those with more complex processes) may require additional documented procedures (particularly those relating to product realization processes) to implement an effective QMS.
Other organizations may require additional procedures, but the size and/or culture of the organization could enable these to be effectively implemented without necessarily being documented. However, in order to demonstrate compliance with ISO 9001:2008, the organization has to be able to provide objective evidence (not necessarily documented) that its QMS has been effectively implemented.
d) Documents needed by the organization to ensure the effective planning, operation and control of its processes:
In order for an organization to demonstrate the effective implementation of its QMS, it may be necessary to develop documents other than documented procedures. However, the only documents specifically mentioned in ISO 9001:2008 are:
- Quality policy (clause 4.2.1.a)
- Quality objectives (clause 4.2.1.a)
- Quality manual (clause 4.2.1.b)
There are several requirements of ISO 9001:2008 where an organization could add value to its QMS and demonstrate conformity by the preparation of other documents, even though the standard does not specifically require them. Examples
may include:
- Process maps, process flow charts and/or process descriptions
- Organization charts
- Specifications
- Work and/or test instructions
- Documents containing internal communications
- Production schedules
- Approved supplier lists
- Test and inspection plans
- Quality plans
All such documents have to be controlled in accordance with the requirements of clause 4.2.3 and/or 4.2.4, as applicable
e) Records:
Examples of records specifically required by ISO 9001:2008 are presented in Annex B.
Organizations are free to develop other records that may be needed to demonstrate conformity of their processes, products and quality management system.
Requirements for the control of records are different from those for other documents, and all records have to be controlled according to those of clause 4.2.4 of ISO 9001:2008.
The following comments are intended to assist users of ISO 9001:2008 in understanding the intent of the general documentation requirements of the International Standard.
a) Documented statements of a quality policy and objectives:
Requirements for the quality policy are defined in clause 5.3 of ISO 9001:2008. The documented quality policy has to be controlled according to the requirements of clause 4.2.3.
Note: Organizations that are revising their quality policy for the first time, or in order to meet the amended requirements in ISO 9001:2008, should pay particular attention to clause 4.2.3 (c), (d) and (g).
Requirements for quality objectives are defined in clause 5.4.1 of ISO 9001:2008. These documented quality objectives are also subject to the document control requirements of clause 4.2.3.
b) Quality Manual:
Clause 4.2.2 of ISO 9001:2008 specifies the minimum content for a quality manual. The format and structure of the manual is a decision for each organization, and will depend on the organization’s size, culture and complexity. Some organizations may choose to use the quality manual for other purposes besides that of simply documenting the QMS
A small organization may find it appropriate to include the description of its entire QMS within a single manual, including all the documented procedures required by the standard.
Large, multi-national organizations may need several manuals at the global, national or regional level, and a more complex hierarchy of documentation.
The quality manual is a document that has to be controlled in accordance with the requirements of clause 4.2.3.
c) Documented procedures:
ISO 9001:2008 specifically requires the organization to have “documented procedures” for the following six activities:
4.2.3 Control of documents
4.2.4 Control of records
8.2.2 Internal audit
8.3 Control of nonconforming product
8.5.2 Corrective action
8.5.3 Preventive action
These documented procedures have to be controlled in accordance with the requirements of clause 4.2.3 Some organizations may find it convenient to combine the procedure for several activities into a single documented procedure (for example, corrective action and preventive action). Others may choose to document a given activity by using more than one documented procedure (for example, internal audits). Both are acceptable.
Some organizations (particularly larger organizations, or those with more complex processes) may require additional documented procedures (particularly those relating to product realization processes) to implement an effective QMS.
Other organizations may require additional procedures, but the size and/or culture of the organization could enable these to be effectively implemented without necessarily being documented. However, in order to demonstrate compliance with ISO 9001:2008, the organization has to be able to provide objective evidence (not necessarily documented) that its QMS has been effectively implemented.
d) Documents needed by the organization to ensure the effective planning, operation and control of its processes:
In order for an organization to demonstrate the effective implementation of its QMS, it may be necessary to develop documents other than documented procedures. However, the only documents specifically mentioned in ISO 9001:2008 are:
- Quality policy (clause 4.2.1.a)
- Quality objectives (clause 4.2.1.a)
- Quality manual (clause 4.2.1.b)
There are several requirements of ISO 9001:2008 where an organization could add value to its QMS and demonstrate conformity by the preparation of other documents, even though the standard does not specifically require them. Examples
may include:
- Process maps, process flow charts and/or process descriptions
- Organization charts
- Specifications
- Work and/or test instructions
- Documents containing internal communications
- Production schedules
- Approved supplier lists
- Test and inspection plans
- Quality plans
All such documents have to be controlled in accordance with the requirements of clause 4.2.3 and/or 4.2.4, as applicable
e) Records:
Examples of records specifically required by ISO 9001:2008 are presented in Annex B.
Organizations are free to develop other records that may be needed to demonstrate conformity of their processes, products and quality management system.
Requirements for the control of records are different from those for other documents, and all records have to be controlled according to those of clause 4.2.4 of ISO 9001:2008.
Monday, September 14, 2009
Costs Of Setting Up A Quality Management System
Costs Of Setting Up A Quality Management System
Common implementation costs that companies incur can be broken down into direct and indirect costs.
The direct costs include, inter alia, the following:
• hiring consultants or external trainers, if required;
• sending personnel for external training;
• acquiring relevant national and international standards of the ISO 9000 family and other related books and publications; and
• acquiring additional equipment, instruments and other resources as identified by the company.
The indirect costs include, inter alia, the following:
• time spent by the management and other staff in developing the system;
• reorganization of the processes, including improvements in the house-keeping, if required;
• external calibration charges for equipment to ensure national and/or international measurement traceability;
• organizing in-house training;
• time spent by internal auditors for periodic internal audits;
• corrective actions, including revision of manuals and procedures, if required; and
• expenditure on word-processing, stationery and other consumables required for the preparation of manuals and documenting procedures, etc.
Some factors can help to lower the above costs. They include:
• having people in the company already conversant with QMS requirements;
• having documented system-related activities such as work instructions, quality plans, procedures, etc. already in place;
• using consultants only for specific activities like gap analysis, training of
auditors, pre-assessment audits, etc., and having in-house staff oversee the remaining activities.
On the other hand, there are factors that can mean higher implementation costs for the company. For example, if your company carries out activities at different locations, or if your company is involved in product design and development, this may increase costs.
For more information please visit http://www.iso9001-standard.us/
Common implementation costs that companies incur can be broken down into direct and indirect costs.
The direct costs include, inter alia, the following:
• hiring consultants or external trainers, if required;
• sending personnel for external training;
• acquiring relevant national and international standards of the ISO 9000 family and other related books and publications; and
• acquiring additional equipment, instruments and other resources as identified by the company.
The indirect costs include, inter alia, the following:
• time spent by the management and other staff in developing the system;
• reorganization of the processes, including improvements in the house-keeping, if required;
• external calibration charges for equipment to ensure national and/or international measurement traceability;
• organizing in-house training;
• time spent by internal auditors for periodic internal audits;
• corrective actions, including revision of manuals and procedures, if required; and
• expenditure on word-processing, stationery and other consumables required for the preparation of manuals and documenting procedures, etc.
Some factors can help to lower the above costs. They include:
• having people in the company already conversant with QMS requirements;
• having documented system-related activities such as work instructions, quality plans, procedures, etc. already in place;
• using consultants only for specific activities like gap analysis, training of
auditors, pre-assessment audits, etc., and having in-house staff oversee the remaining activities.
On the other hand, there are factors that can mean higher implementation costs for the company. For example, if your company carries out activities at different locations, or if your company is involved in product design and development, this may increase costs.
For more information please visit http://www.iso9001-standard.us/
Wednesday, September 9, 2009
ISO 9001:2008 FAQ
ISO 9001:2008 FAQ
What Is The ISO 9001: 2008 Standard?
The latest edition of the ISO 9001 standard ISO 9001: 2008, Quality Management Systems – Requirements, was officially published by (ISO) the International Organization for Standardization on November 14, 2008. It is the fourth edition of the ISO 9001 standard since it was first published in 1987.
Who Is Responsible For Revising The standards?
The ISO Technical Committee no.176, Sub-committee no.2 (ISO/TC 176/SC 2) is responsible for the revision process in collaboration with consensus among quality and industry experts nominated by ISO Member bodies, and representing all interested parties.
Does ISO 9001:2008 Have Additional Requirements Beyond ISO 9001:2000 ?
This latest (4th) edition of ISO 9001 contains no new requirements compared to the (3rd) year 2000 edition, which it replaces. What it does is provide clarification to the existing requirements of ISO 9001:2000 based on eight years’ experience of worldwide implementing of the standard and introduces changes intended to improve consistency with the environmental management system standard, ISO 14001:2004.
The clarifications and changes in ISO 9001:2008 represents fine-tuning, rather than a thorough overhaul. It focuses on changes that organizations might make to better comply with the spirit of the standard without adding, deleting, or altering its requirements. The changes are minor in nature and address such issues as the need to clarify, provide greater consistency, resolve perceived ambiguities, and improve compatibility with ISO 14001. The numbering system and the structure of the standard remain unchanged. As a result, the new standard looks much like the old standard.
ISO has grouped the changes incorporated in this ISO 9001:2008 edition into the following categories:- No changes or minimum changes on user documents, including records- No changes or minimum changes to existing QMS processes- No additional training required or minimal training required- No effects on current certifications
In contrast, the 3rd edition, ISO 9001:2000 published in 2000, represented a major overhaul of the standard, including new requirements and a sharpened customer focus, reflecting developments in quality management and experience gained since the publication of the initial version.
Then Why Was It Necessary To Introduce This Revision?All ISO standards – currently more than 17 400 – are periodically reviewed. To ensure that ISO standards are maintained at the state of the art, ISO has a rule requiring them to be periodically reviewed and a decision taken to confirm, withdraw or revise the documents. The review process must be initiated within 3 years of publication of a standard. The review considers several factors such as technological evolution, new methods and materials, new quality and safety requirements, or questions of interpretation and application.
The review of ISO 9001 resulting in the 2008 edition was carried out by subcommittee SC 2 of ISO/TC 176. This subcommittee, which is responsible for the ISO 9000 family, unites expertise from 80 participating countries and 19 international or regional organizations, plus other technical committees.
This review has a number of inputs that help it:
A global user questionnaire/survey
A market Justification Study
Suggestions arising from the ISO/TC 176 interpretation process
Opportunities for increased compatibility with ISO 14001
The need for greater clarity, ease of use, and improved translation
Current trends – keeping up with recent developments in management system practices.
How Does The New ISO 9001 Edition Affect Existing ISO 9001 QMS’s?
As organizations start looking at ISO 9001:2008, they will wonder to what extent the changes might affect them. To a large extent, the new standard will not result in significant change to existing quality management systems (QMS).
ISO/TC 176 was careful in not making change for change sake. In the case of editorial changes, this was especially true. This could have lead to a false impression that there was a change in requirements, carrying greater significance than was intended. In those instances, when the committee members couldn’t come to a consensus in determining if a change added or deleted a requirement, they opted to retain the existing text. They decided it was better to err on the side of caution rather than to contribute to any misunderstanding in the marketplace.
The changes that have been incorporated into this edition of the ISO 9001 standard include changes that should lead to a better understanding across a broader range of product types, including service organizations; use of deliberate wording to minimize the potential for incorrect user interpretation; and reflect nuances of similar concepts. Lastly, some of the changes to specific clauses were made based on the 2004 International User Feedback Survey. This survey was conducted after the publication of ISO 9001:2000 and had invited respondents to identify areas they most wanted to see improved.
What Is The ISO 9001: 2008 Standard?
The latest edition of the ISO 9001 standard ISO 9001: 2008, Quality Management Systems – Requirements, was officially published by (ISO) the International Organization for Standardization on November 14, 2008. It is the fourth edition of the ISO 9001 standard since it was first published in 1987.
Who Is Responsible For Revising The standards?
The ISO Technical Committee no.176, Sub-committee no.2 (ISO/TC 176/SC 2) is responsible for the revision process in collaboration with consensus among quality and industry experts nominated by ISO Member bodies, and representing all interested parties.
Does ISO 9001:2008 Have Additional Requirements Beyond ISO 9001:2000 ?
This latest (4th) edition of ISO 9001 contains no new requirements compared to the (3rd) year 2000 edition, which it replaces. What it does is provide clarification to the existing requirements of ISO 9001:2000 based on eight years’ experience of worldwide implementing of the standard and introduces changes intended to improve consistency with the environmental management system standard, ISO 14001:2004.
The clarifications and changes in ISO 9001:2008 represents fine-tuning, rather than a thorough overhaul. It focuses on changes that organizations might make to better comply with the spirit of the standard without adding, deleting, or altering its requirements. The changes are minor in nature and address such issues as the need to clarify, provide greater consistency, resolve perceived ambiguities, and improve compatibility with ISO 14001. The numbering system and the structure of the standard remain unchanged. As a result, the new standard looks much like the old standard.
ISO has grouped the changes incorporated in this ISO 9001:2008 edition into the following categories:- No changes or minimum changes on user documents, including records- No changes or minimum changes to existing QMS processes- No additional training required or minimal training required- No effects on current certifications
In contrast, the 3rd edition, ISO 9001:2000 published in 2000, represented a major overhaul of the standard, including new requirements and a sharpened customer focus, reflecting developments in quality management and experience gained since the publication of the initial version.
Then Why Was It Necessary To Introduce This Revision?All ISO standards – currently more than 17 400 – are periodically reviewed. To ensure that ISO standards are maintained at the state of the art, ISO has a rule requiring them to be periodically reviewed and a decision taken to confirm, withdraw or revise the documents. The review process must be initiated within 3 years of publication of a standard. The review considers several factors such as technological evolution, new methods and materials, new quality and safety requirements, or questions of interpretation and application.
The review of ISO 9001 resulting in the 2008 edition was carried out by subcommittee SC 2 of ISO/TC 176. This subcommittee, which is responsible for the ISO 9000 family, unites expertise from 80 participating countries and 19 international or regional organizations, plus other technical committees.
This review has a number of inputs that help it:
A global user questionnaire/survey
A market Justification Study
Suggestions arising from the ISO/TC 176 interpretation process
Opportunities for increased compatibility with ISO 14001
The need for greater clarity, ease of use, and improved translation
Current trends – keeping up with recent developments in management system practices.
How Does The New ISO 9001 Edition Affect Existing ISO 9001 QMS’s?
As organizations start looking at ISO 9001:2008, they will wonder to what extent the changes might affect them. To a large extent, the new standard will not result in significant change to existing quality management systems (QMS).
ISO/TC 176 was careful in not making change for change sake. In the case of editorial changes, this was especially true. This could have lead to a false impression that there was a change in requirements, carrying greater significance than was intended. In those instances, when the committee members couldn’t come to a consensus in determining if a change added or deleted a requirement, they opted to retain the existing text. They decided it was better to err on the side of caution rather than to contribute to any misunderstanding in the marketplace.
The changes that have been incorporated into this edition of the ISO 9001 standard include changes that should lead to a better understanding across a broader range of product types, including service organizations; use of deliberate wording to minimize the potential for incorrect user interpretation; and reflect nuances of similar concepts. Lastly, some of the changes to specific clauses were made based on the 2004 International User Feedback Survey. This survey was conducted after the publication of ISO 9001:2000 and had invited respondents to identify areas they most wanted to see improved.
Update on ISO 9001:2008
Update on ISO 9001:2008
Following a recent meeting of ISO’s Technical Committee TC176 in Helsinki, Finland, from June
11 – 15t, 2007, publication of the new version of ISO 9001 has been brought forward from 2009
and is now scheduled to be published in October 2008. Experts representing over 70 ISO member
bodies, met to discuss the comments received during circulation of the Committee Draft (”CD”) of
the new standard, and concluded that in view of the very limited changes being proposed, the draft
is now sufficiently mature to progress directly to the DIS (Draft International Standard).
The main changes being introduced into the new standard are as follows:
Clause 0.2 (Process approach)
Text added to emphasize the importance of processes being capable of achieving desired outputs
Clause 1.1 (Scope)
Clarification that “product” also includes intermediate product
Explanation regarding statutory, regulatory and legal requirements
Clause 4.1 (General requirements)
Notes added to explain more about outsourcing
Types of control that may be applied to outsourced processes
Relationship to clause 7.4 (Purchasing)
Clarification that outsourced processes are still responsibility of the organization and must be
included in the quality management system
Clause 4.2.1 (Documentation)
Clarification that QMS documentation also includes records
Documents required by the standard may be combined
ISO 9001 requirements may be covered by more than one documented procedure
Clause 4.2.3 (Document control)
Clarification that only external documents relevant to the QMS need to be controlled
Clause 4.2.4 (Records control)
Editorial changes only (better alignment with ISO 14001)
Clause 5.5.2 (Management rep)
Clarifies that this must be a member of the organization’s own management
Clause 6.2.1 (Human resources)
Clarification that competence requirements are relevant for any personnel who are involved in the
operation of the quality management system
Clause 6.3 (Infrastructure)
Includes information systems as example
Clause 6.4 (Work environment)
Clarifies that this includes conditions under which work is performed and includes, for example
physical, environmental and other factors such as noise, temperature, humidity, lighting, or weather
Clause 7.2.1 (Customer related processes)
Clarifies that post-delivery activities may include:
- Actions under warranty provisions
- Contractual obligations such as maintenance services
- Supplementary services such as recycling or final disposal
Clause 7.3.1 (Design & development planning)
Clarifies that design and development review, verification and validation have distinct purposes
These may be conducted and recorded separately or in any combination as suitable for the product
and the organization
Clause 7.3.3(Design & development outputs)
Clarifies that information needed for production and service provision includes preservation of the product
Clause 7.5.4 (Customer property)
Explains that both intellectual property and personal data should be considered as customer property
Clause 7.6 (Now retitled Control of Monitoring and Measuring equipment)
Explanatory notes added regarding the use of computer software: “Confirmation of the ability of computer software to satisfy the intended application would typically include its verification and configuration management to maintain its suitability for use.”
Clause 8.2.1 (Customer satisfaction)
Note added to explain that monitoring of customer perception may include input from sources such as customer satisfaction surveys, customer data on delivered product quality, user opinion surveys, lost business analysis, compliments, and dealer reports
Clause 8.2.3 (Monitoring / Measurement of process)
Note added to clarify that when deciding on appropriate methods, the organization should consider impact on the conformity to product requirements and on the effectiveness of the quality management system.
Following a recent meeting of ISO’s Technical Committee TC176 in Helsinki, Finland, from June
11 – 15t, 2007, publication of the new version of ISO 9001 has been brought forward from 2009
and is now scheduled to be published in October 2008. Experts representing over 70 ISO member
bodies, met to discuss the comments received during circulation of the Committee Draft (”CD”) of
the new standard, and concluded that in view of the very limited changes being proposed, the draft
is now sufficiently mature to progress directly to the DIS (Draft International Standard).
The main changes being introduced into the new standard are as follows:
Clause 0.2 (Process approach)
Text added to emphasize the importance of processes being capable of achieving desired outputs
Clause 1.1 (Scope)
Clarification that “product” also includes intermediate product
Explanation regarding statutory, regulatory and legal requirements
Clause 4.1 (General requirements)
Notes added to explain more about outsourcing
Types of control that may be applied to outsourced processes
Relationship to clause 7.4 (Purchasing)
Clarification that outsourced processes are still responsibility of the organization and must be
included in the quality management system
Clause 4.2.1 (Documentation)
Clarification that QMS documentation also includes records
Documents required by the standard may be combined
ISO 9001 requirements may be covered by more than one documented procedure
Clause 4.2.3 (Document control)
Clarification that only external documents relevant to the QMS need to be controlled
Clause 4.2.4 (Records control)
Editorial changes only (better alignment with ISO 14001)
Clause 5.5.2 (Management rep)
Clarifies that this must be a member of the organization’s own management
Clause 6.2.1 (Human resources)
Clarification that competence requirements are relevant for any personnel who are involved in the
operation of the quality management system
Clause 6.3 (Infrastructure)
Includes information systems as example
Clause 6.4 (Work environment)
Clarifies that this includes conditions under which work is performed and includes, for example
physical, environmental and other factors such as noise, temperature, humidity, lighting, or weather
Clause 7.2.1 (Customer related processes)
Clarifies that post-delivery activities may include:
- Actions under warranty provisions
- Contractual obligations such as maintenance services
- Supplementary services such as recycling or final disposal
Clause 7.3.1 (Design & development planning)
Clarifies that design and development review, verification and validation have distinct purposes
These may be conducted and recorded separately or in any combination as suitable for the product
and the organization
Clause 7.3.3(Design & development outputs)
Clarifies that information needed for production and service provision includes preservation of the product
Clause 7.5.4 (Customer property)
Explains that both intellectual property and personal data should be considered as customer property
Clause 7.6 (Now retitled Control of Monitoring and Measuring equipment)
Explanatory notes added regarding the use of computer software: “Confirmation of the ability of computer software to satisfy the intended application would typically include its verification and configuration management to maintain its suitability for use.”
Clause 8.2.1 (Customer satisfaction)
Note added to explain that monitoring of customer perception may include input from sources such as customer satisfaction surveys, customer data on delivered product quality, user opinion surveys, lost business analysis, compliments, and dealer reports
Clause 8.2.3 (Monitoring / Measurement of process)
Note added to clarify that when deciding on appropriate methods, the organization should consider impact on the conformity to product requirements and on the effectiveness of the quality management system.
Tuesday, September 1, 2009
ISO 9001 And ISO 14001 Information Site
ISO 9001 And ISO 14001 Information Site
http://iso9001-procedure.blogspot.com/
http://iso14001ems.blogspot.com/
http://iso14001qualitymanual.blogspot.com/
http://iso14001requirements.blogspot.com/
http://iso14001certification.blogspot.com/
http://iso14001qualitysystem.blogspot.com/
http://environmentsystem.blogspot.com/
http://iso14000series.blogspot.com/
http://iso9000standard.blogspot.com/
http://six-sigma-qc.blogspot.com/
http://iso9001-documents.blogspot.com/
http://iso9001-training.blogspot.com/
http://quality-assurance-system.blogspot.com/
http://iso14001standard.blogspot.com/
http://iso9001-certification.blogspot.com/
http://iso9001-certification.blogspot.com/
http://iso9000series.blogspot.com/
http://iso9001standards.blogspot.com/
http://iso9000certification.blogspot.com/
http://isotemplate.blogspot.com/
http://iso9001training.blogspot.com/
http://qualitymanualsystem.blogspot.com/
http://iso9001-procedure.blogspot.com/
http://iso14001ems.blogspot.com/
http://iso14001qualitymanual.blogspot.com/
http://iso14001requirements.blogspot.com/
http://iso14001certification.blogspot.com/
http://iso14001qualitysystem.blogspot.com/
http://environmentsystem.blogspot.com/
http://iso14000series.blogspot.com/
http://iso9000standard.blogspot.com/
http://six-sigma-qc.blogspot.com/
http://iso9001-documents.blogspot.com/
http://iso9001-training.blogspot.com/
http://quality-assurance-system.blogspot.com/
http://iso14001standard.blogspot.com/
http://iso9001-certification.blogspot.com/
http://iso9001-certification.blogspot.com/
http://iso9000series.blogspot.com/
http://iso9001standards.blogspot.com/
http://iso9000certification.blogspot.com/
http://isotemplate.blogspot.com/
http://iso9001training.blogspot.com/
http://qualitymanualsystem.blogspot.com/
Subscribe to:
Posts (Atom)